Centos的Inode和Block的相关知识

linux 的inode及block的相关知识：

1> Linux系统分区格式化文件系统之后，系统会分为Inode及Block两部分：

1)Inode为系统文件的属性信息（ls -l的结果）及指向文件实体的指针，但是没有存放文件名，一般在上级目录里的Block。

2)Block为存放数据的，ext3/ext4一般为1k,2k,4k,一般默认4k

3)一个文件不论多大至少占用一个Inode和一个Block，一个Block只能存放一个文件的内容，block的数量大于Inode的数量，多个文件可以占用同一个 inode(硬链接) 。

4）访问文件, 通过文件–>inode(验证权限)—>blocks.

5）inode 一般情况默认256B，block大小1k，2k，4k，默认4k,注意，引导分区等特殊分区除外。

6）通过df -i 查看inode的数量及使用情况,dumpe2fs /dev/sda1  查看inode及block的大小和数量。

7）一个block只能 被一个文件使用 ，如果一个文件很小block太大，剩余空间浪费，无法继续被其他文件使用。

8）block不是越大越好，根据业务的文件大小进行选择，一般就是默认 4k。

9）可以在格式化的时候改变inode及block的大小，使用mkfs.ext4 -b 2048 -I 1024  /dev/sdb2

2>Linux中df命令的功能是用来检查linux服务器的文件系统的磁盘空间占用情况。可以利用该命令来获取硬盘被占用了多少空间，目前还剩下多少空间等信息。

1．命令格式：

df [选项] [文件]

2.参数 :

df -i  查看参数多少个

  [root@techW ~]# df -i  Filesystem            Inodes IUsed   IFree IUse% Mounted on  /dev/mapper/vg_techw-lv_root                       1152816 55846 1096970    5% /  tmpfs                 125596     1  125595    1% /dev/shm  /dev/sda1             128016    38  127978    1% /boot

df -h 查看磁盘大小：

  [root@techW ~]# df -h  Filesystem            Size  Used Avail Use% Mounted on  /dev/mapper/vg_techw-lv_root                         18G  1.5G   15G   9% /  tmpfs                 491M     0  491M   0% /dev/shm  /dev/sda1             477M   36M  416M   8% /boot

查看当前系统分区的Inode及Block的总量及使用量：

  [root@techW ~]# dumpe2fs  /dev/sda1 | grep -i "block size"  dumpe2fs 1.41.12 (17-May-2010)  Block size:               1024  [root@techW ~]#   [root@techW ~]#   [root@techW ~]# dumpe2fs  /dev/sda1 | grep -i "inode size"  dumpe2fs 1.41.12 (17-May-2010)  Inode size:               128    ###boot分区为128，常规分区为256  [root@techW ~]#   [root@techW ~]#   [root@techW ~]# dumpe2fs  /dev/sda1 | grep -i "inode count"  dumpe2fs 1.41.12 (17-May-2010)  Inode count:              128016  [root@techW ~]#   [root@techW ~]# dumpe2fs  /dev/sda1 | grep -i "block count"  dumpe2fs 1.41.12 (17-May-2010)  Block count:              512000  Reserved block count:     25600

3>添加一块磁盘，格式化，改变Inode及 Block的大小，挂载查看硬盘的Inode及Block数量：

1）添加一块5G的磁盘，为方便区分设置为/dev/sdb，fdisk分区，然后mkfs.ext4格式化

（虚拟机增加一块5G的硬盘，分区，格式化）

  [root@techW ~]# fdisk  /dev/sdb  Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel  Building a new DOS disklabel with disk identifier 0x2d37eabe.  Changes will remain in memory only, until you decide to write them.  After that, of course, the previous content won't be recoverable.  Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)  WARNING: DOS-compatible mode is deprecated. It's strongly recommended to           switch off the mode (command 'c') and change display units to           sectors (command 'u').  Command (m for help):  n ### add a new partition  Command action     e   extended     p   primary partition (1-4)  p  Partition number (1-4): 2  ### 为做区分，选择2  First cylinder (1-652, default 1):   Using default value 1  Last cylinder, +cylinders or +size{K,M,G} (1-652, default 652):   Using default value 652  Command (m for help): w   ###  write table to disk and exit  The partition table has been altered!  Calling ioctl() to re-read partition table.  Syncing disks.

分区时的参数命令：

  a   toggle a bootable flag  b   edit bsd disklabel  c   toggle the dos compatibility flag  d   delete a partition  l   list known partition types  m   print this menu  n   add a new partition  o   create a new empty DOS partition table  p   print the partition table  q   quit without saving changes  s   create a new empty Sun disklabel  t   change a partition's system id  u   change display/entry units  v   verify the partition table  w   write table to disk and exit  x   extra functionality (experts only)

  [root@techW ~]# mkfs.ext4 /dev/sdb2  mke2fs 1.41.12 (17-May-2010)  Filesystem label=  OS type: Linux  Block size=4096 (log=2)    ###默认的Block的大小为4096  Fragment size=4096 (log=2)  Stride=0 blocks, Stripe width=0 blocks  327680 inodes, 1309289 blocks  65464 blocks (5.00%) reserved for the super user  First data block=0  Maximum filesystem blocks=1342177280  40 block groups  32768 blocks per group, 32768 fragments per group  8192 inodes per group  Superblock backups stored on blocks:           32768, 98304, 163840, 229376, 294912, 819200, 884736  Writing inode tables: done                              Creating journal (32768 blocks): done  Writing superblocks and filesystem accounting information: done  This filesystem will be automatically checked every 26 mounts or  180 days, whichever comes first.  Use tune2fs -c or -i to override.

2）###inode的大小范围为128-2048,block的大小范围为1024-4096####

3)将Block和Inode的大小都改为2048：

  [root@techW ~]# mkfs.ext4 -b 2048 -I 2048 /dev/sdb2  mke2fs 1.41.12 (17-May-2010)  Filesystem label=  OS type: Linux  Block size=2048 (log=1)  Fragment size=2048 (log=1)  Stride=0 blocks, Stripe width=0 blocks  326400 inodes, 2618578 blocks  130928 blocks (5.00%) reserved for the super user  First data block=0  Maximum filesystem blocks=540016640  160 block groups  16384 blocks per group, 16384 fragments per group  2040 inodes per group  Superblock backups stored on blocks:           16384, 49152, 81920, 114688, 147456, 409600, 442368, 802816, 1327104,           2048000  Writing inode tables: done                              Creating journal (32768 blocks): done  Writing superblocks and filesystem accounting information: done  This filesystem will be automatically checked every 30 mounts or  180 days, whichever comes first.  Use tune2fs -c or -i to override.

4)使用dumpe2fs命令查询Inode和Block的大小：

  [root@techW ~]# dumpe2fs  /dev/sdb2 | grep "Inode size"  dumpe2fs 1.41.12 (17-May-2010)  Inode size:               2048  ###大小更改成功  [root@techW ~]#   s  /dev/sdb2 | grep "Block size"  dumpe2fs 1.41.12 (17-May-2010)  Block size:               2048  ###大小更改成功